Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2020-04-25 19:03
419
Company Profile
By certification [File Integrity]
Contact：vfine(Mr.)
Email：
Telephone：
Phone：
Area：Beijing
Address：Beijing
Website：http://www.vfine-machinery.com/ http://vfine.gjgcom.com/
1.Pet stretch moulding machine YF-6LE
6-cavity, stretch blowing molding machine，Two stage pet blowing machine, in linear structure
Output: 8500-9000bph
PET container Volume range: 50ml-2L
2.Application scope
Suitable for producing all kinds of PET water bottle, carbonate bottle, middle temperature / warm filling
3.Advantage of pet stretch moulding machine YF-6LE and machine features
●Linear structure, modular design, easy maintenance;
4.Pet stretch moulding machine YF-6LE specifications
| MODEL | YF-6LE |
Max Bottle Volumn |
2000ml |
Cavity number |
6 |
output |
8500-9000BPH |
Machine size |
5000*2000*2500mm |
Machine weight |
8000kg |
Machine details
1)Oil-free preform transferring unit, no neet to concern about the preform polluted in transferring unit.
2)World famous brand Germany origin components for whole air system; World famous brand servo system, and electrical system.
3)High quality machine frame and main plates, 15years lifetime.
Slight and silent clamping unit, ensure nice working environment for operators
4)+/-3% heating output difference only for the heating oven, ensure the stable preform heating for stable product quality.
Single line preform infeeding unit, no need concern about the preform jam.
Shipment for blow molding machine of 9000bph Vfine machine
Maintenance of plasticizing system
1) During the operation of the belt drive pair, the belt may be slightly stretched and appropriate tension is required; the end faces of the two pulleys shall be in the same plane; for the coupling drive, the coaxiality of the motor shaft and the gearbox shaft shall be ensured.
2) The gearbox needs to be changed regularly. No. 150 (or no. 220) medium extreme pressure industrial gear oil shall be selected. The new machine shall be used for 500 hours to change the oil, and then the oil shall be changed every 3000 hours. When the machine just stops working and the gearbox is still at a high temperature, change the oil. After the old oil is discharged, wash the sediment with a small amount of new oil, clean the filter of the lubricating oil pump, and then add new oil to 1 / 2 ~ 2 / 3 of the liquid level window.
3) The temperature of the barrel and die head is usually more than 150 degrees. All fastening screws must be coated with copper disulfide for easy disassembly.
4) The die head parts are precisely matched, and the disassembly and assembly need to be particularly careful and skillful, which can not be just done to prevent damage and deformation; the fastening screws need to be tightened evenly diagonally, and pay attention to the concentricity and perpendicularity; the multi-mode head needs to pay attention to the deviation of the die head center distance (< 0, 1).
5) The overflow of the storage piston of the die head of the storage cylinder needs to be cleaned regularly, generally about one week, and the overflow of the inner die core needs to be cleaned for 3-5 years, otherwise the storage stroke and the wall thickness control stroke will be affected.
6) Regular inspection: gearbox temperature, extrusion motor temperature, barrel root and cooling water jacket temperature, die head cooling plate temperature.
7) Safety reminder: the cylinder and die head are in high temperature and the heater terminal is electrified. Pay attention to safety during maintenance and do a good job of protection to prevent scalding and electric shock.
Production speed regulation of bottle blowing machine
By increasing the exhaust time and saturation time to slow down the speed, while reducing the overall temperature of the light box, the overall temperature of the light box needs to be reduced by 1% for every 0 and 1s increase. The operation of increasing the speed is the opposite of reducing the speed. (the minimum exhaust time is 0, 8s, and bottle skipping will occur when the exhaust time is lower than 0, 8s) no matter how fast the speed is increased or decreased, the bottle quality can not be changed at most every time after 0, 3S observation for a period of time, and the speed can be adjusted after the bottle quality is stable. Carefully observe the quality of the bottle and adjust the temperature of the light box at any time. When the cycle of bottle blowing changes for 0 and 1s, the output of bottle will change about 50 times per hour. The bottle blowing machine should adjust the speed of bottle blowing reasonably according to the speed of the filling machine.
http://www.vfine-machinery.com/
